• banner

Products

  • Environmental protection auto professional paint room-s-700

    Environmental protection auto professional paint room-s-700

    The paint room is composed of chamber body, lighting device, air filtration system, air supply system, exhaust system, paint mist treatment system, electric control system, safety protection device and so on.

  • Water rotary spray paint roomS-1600

    Water rotary spray paint roomS-1600

    Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the exhaust effect of the outdoor exhaust fan.

  • Hardware parts dusting production line

    Hardware parts dusting production line

    The powder spraying system adopts high voltage electrostatic powder spraying, which is mainly composed of chamber body, recovery device, spraying device and closed chamber.

  • Integral mobile spray paint room

    Integral mobile spray paint room

    The equipment is mainly composed of chamber body, air supply system, air exhaust system, paint mist treatment system, exhaust gas treatment system, walking drive system, lighting system, electric control system and so on.

  • Automatic powder spraying production coating line

    Automatic powder spraying production coating line

    This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable.

  • Auto automatic robot paint room

    Auto automatic robot paint room

    According to the properties of coating production, it can be divided into intermittent production and continuous production. Intermittent production spray room is mainly used for single or small batch of workpiece painting operation, can also be used for large batch of small workpiece painting operation. Its form according to the workpiece placement way has the table, the suspension type, the table mobile three.

  • Aerial heavy duty conveyer chainSS-120

    Aerial heavy duty conveyer chainSS-120

    Product release chain conveying coating production line, including spray type pre-treatment equipment, moisture drying furnace, paint room, leveling room, paint drying furnace and product release chain conveying device, the spray type pre-treatment equipment, moisture drying furnace, paint room, leveling room and paint drying furnace through the product release chain conveying device connected in turn; The conveying unit in the accumulation chain conveying device passes through the spray-type pre-treatment equipment, water drying furnace, paint chamber, leveling chamber and paint drying furnace internally.

  • Zeolite wheel adsorption concentration

    Zeolite wheel adsorption concentration

    Zeolite runner is the concentration of large air volume, low concentration of waste gas to high concentration, small air volume of waste gas, so as to reduce equipment investment costs and operating costs, improve the efficient treatment of VOC waste gas. In the treatment of large air volume, low concentration of waste gas combustion and recovery, if there is no zeolite wheel, direct combustion, exhaust gas treatment equipment is not only huge, but also the operating cost will be very large.

  • Drying professional 4-element professional hot blast stove S-2000

    Drying professional 4-element professional hot blast stove S-2000

    Fan embedded ternary indirect heat exchanger unit integrates fan, filter, combustion, (electricity, heat conducting oil, steam, etc.) and heat exchange device, which is collectively referred to as ternary hot blast stove.

  • Ground type heavy duty conveyor plate chainSS-6000

    Ground type heavy duty conveyor plate chainSS-6000

    Ground chain structure is very simple, only a chain plate with hinged rings on both sides and a pin. One side of both hinge rings is fixedly connected with the pin shaft and is called a fixed hinge ring. The other side is in the inside of the hinge ring and the pin shaft rolling connection, called the active hinge ring. The movable hinge ring and pin form the hinge of the flat-top chain.

  • Room of the lacquer that bake

    Room of the lacquer that bake

    This product is used for painting drying, powder curing and all kinds of drying equipment, the characteristics of this product is safe, environmental protection, energy saving and so on.

  • High temperature powder curing bridge drying furnace-jm-900

    High temperature powder curing bridge drying furnace-jm-900

    Hot air circulation heating method is adopted to heat the workpiece. Work, through the fan to external fresh air after mesh filter and heater to heat to the interior ministry, the workpiece heated by the outlet side, from the top after discharge, through the inner loop, in addition to breathe in a small amount of fresh air, most of the hot air heated by continue to use again, into the chamber, the chamber temperature gradually increases, When the temperature reaches the set temperature, the burner stops.

12 Next > >> Page 1 / 2