China Environmental Protection Products Exporters – Zeolite wheel adsorption concentration – Jinming
China Environmental Protection Products Exporters – Zeolite wheel adsorption concentration – Jinming Detail:
Basic principles
The basic principle of zeolite wheel structure
The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone.
VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the concentration wheel.
Adsorbed in the concentration of organic exhaust gas VOCs in the runner, in the regeneration area by hot air treatment and desorbed, concentrated to 5-15 times the degree.
The condensing runner is cooled in the cooling area, and then heated by the air in the cooling area is used as recycled air to achieve the effect of energy saving.
Zeolite runner equipment features
1. High adsorption and desorption efficiency.
2. Zeolite runner adsorption VOCs produced by the pressure drop is very low, can greatly reduce power consumption.
3. Make the original high air volume, low concentration of VOCs exhaust gas, converted into low air volume, high concentration of exhaust gas, concentration of 5-20 times, greatly reduce the post-treatment equipment specifications, lower operating cost.
4. The overall system adopts modular design, with minimum space requirements, and provides continuous and unmanned control mode.
5. System automation control, single button start, simple operation, and can be matched with man-machine interface monitoring important operation data.
Zeolite runner and honeycomb activated carbon adsorption concentration device comparison: zeolite content directly determines the adsorption efficiency, so the zeolite content is very important. The purity of zeolite is as high as 90%.
Suitable for all kinds of industrial waste gas treatment
Product detail pictures:
Related Product Guide:
We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for China Environmental Protection Products Exporters – Zeolite wheel adsorption concentration – Jinming , The product will supply to all over the world, such as: Czech Republic, Buenos Aires, Singapore, We are in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
By Amelia from Armenia - 2017.03.28 12:22
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Olivia from Accra - 2017.08.18 11:04
Related products
-
High Quality Dust Controller – Whirlwin...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
Coating Line Machine Suppliers – Dustin...
Introduction Coating production line mainly by pretreatment electrophoresis line (electrophoretic paint is the earliest developed water-based coating, its main characteristics are high coating efficiency, economic safety, less pollution, can achieve complete automation management. Pretreatment is required before coating electrophoretic paint), sealing bottom coating line, middle coating line, surface coating line, finishing line and its drying system. The whole conveying system of the pa...
-
China Powder Coating Remover Spray Factory R...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
-
China Best Dust Collection System Suppliers ...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
High Quality Drying Equipment Suppliers –...
Equipment composition description 1. Chamber Body The chamber body is through type, the column and beam in the chamber body are welded with section steel to meet the load-bearing requirements of the chamber body and the workpiece. The inner plate of the chamber is made of 1.2mm high quality galvanized steel plate, the outer wall is made of 0.6mm galvanized corrugated steel plate, and the inner skeleton is made of U-shaped steel, Angle steel and galvanized steel plate. The thickness of t...
-
High Quality Coil Coating Line Factories –...
The chamber body The chamber body is composed of skeleton, wall panel, electric rolling curtain door, lighting system, safety side door and other parts. The chamber body is through type, the whole chamber body skeleton structure is welded into one, forming a steel frame structure, and through anti-rust treatment; The chamber wall panel is assembled structure, all the panels are made of 1.2mm galvanized sheet folding assembly; The wrapping Angle is the whole galvanized sheet bending formi...
