Spraying A Room With Paint Suppliers – Automatic powder spraying production coating line – Jinming
Spraying A Room With Paint Suppliers – Automatic powder spraying production coating line – Jinming Detail:
Introduction
This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable.
Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces.
Big cyclone adopts European technology, single separation rate can reach 95%-98%.
After the filter adopts rotary wing type filter element recovery, high efficiency, low noise. The equipment is equipped with automatic recovery and screening system to ensure the normal pollution-free circulation of powder.
The filter element adopts GE film coated filter element from the United States, the filter precision can reach 99.99%, and the tail gas can be directly discharged to the workshop. At the same time, the nanoscale PTFE film covered by the membrane filter element can prevent micro powder from entering the inner filter material, ensure that the filter element is easy to clean, theoretically can ensure the permanent use of the filter element.
The bottom of the spray room is equipped with pulse air flow automatic cleaning system to ensure the timely recovery of the powder.
Convenient cleaning uses the following advanced technology
1. The two-stage recovery system of single pipe cyclone is adopted, which is currently recognized as the fastest recovery system in China.
2. The cone tube under the cyclone is connected with the hinge type fastener, which is convenient to move and clean.
3. Spray room adopts arc roof structure, easy to clean.
4. Using round stainless steel powder barrel, easy to disassemble and clean.
System configuration man-machine interface, convenient operation, parameter setting and maintenance: friendly Chinese man-machine interface, parameter setting, alarm information prompt, maintenance prompt, password protection and other functions. Thus make the whole equipment simple operation, convenient maintenance.
Used for all kinds of workpiece painting, other models can be customized.
Product detail pictures:
Related Product Guide:
While using the "Client-Oriented" company philosophy, a demanding high-quality management method, innovative producing products and also a sturdy R&D workforce, we always deliver premium quality merchandise, superb solutions and aggressive selling prices for Spraying A Room With Paint Suppliers – Automatic powder spraying production coating line – Jinming , The product will supply to all over the world, such as: Philippines, Guinea, Amsterdam, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.
By Elma from Georgia - 2017.04.08 14:55
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Lilith from Israel - 2018.07.27 12:26
Related products
-
China Diy Dust Extractor – Whirlwind du...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
Physical Interference Factory – Whirlwi...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
High Quality Used Dust Collector Factories R...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
China Dust Collector Supplier – Zeolite...
Basic principles The basic principle of zeolite wheel structure The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone. VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the co...
-
Overhead Dust Collector Factories – Whi...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
High Quality General Dust Collector Factory ...
Introduction PL series single machine dust removal equipment is the domestic more dust removal equipment, the equipment by fan, filter type filter, dust collector trinity. The filter barrel of the PL single-machine bag filter is made of imported polyester fiber, which has many advantages such as high dust removal efficiency, fine dust collection, small size, convenient installation and maintenance, long service life and so on. PL series single machine dust collector in the equipment...
